ada9f895-44d4-4cbe-b234-2938d07da923.png
28c35110-1ad9-4820-8444-084b2566f833.png
8e81d720-db1a-478e-a397-6b34e6d61d2a.png
5b55e51f-137a-4869-8d23-a65d9d9edd2f.png
36e33ef1-87ae-4a9e-809e-a56d6588c33e.png
1000015200.jpg

UltraWide Diamond Grinder

CA$7,840.00

UltraWide Diamond Grinder

The UltraWide Diamond Grinder is a 400 mm ski and snowboard base grinding system engineered for precision surface preparation in compact workshop environments. It is designed for rental operations, service shops, and technical tuning applications where consistent base refinement, efficient material removal, and reliable operation are essential.

Precision Base Grinding

The machine uses an electroplated synthetic diamond grinding cylinder to produce a controlled, uniform base finish. This grinding method is effective for removing burrs, nicks, and surface irregularities while maintaining consistent contact across the full width of the base. The result is a clean, repeatable grind that supports improved glide characteristics and more predictable on-snow performance.

Designed for Controlled Performance

With a 400 mm grinding cylinder, the UltraWide Diamond Grinder provides full-width coverage for all ski and snowboard applications. Its compact footprint makes it well suited to smaller service areas, while its 115V power requirement allows operation on standard North American electrical service. The 1.5 HP motor delivers the torque needed for wet grinding applications while keeping power demand practical for shop use.

Efficient Shop Integration

The UltraWide Diamond Grinder is intended as a technical solution for smaller shops that need professional grinding capability without the complexity of a full-size stone machine. Its straightforward design supports faster setup, reduced maintenance requirements, and easier day-to-day operation. For shops managing high turnaround or limited floor space, it offers a practical balance of capability and efficiency.

Maintenance and Serviceability

The system is designed with serviceability in mind. Lower maintenance demands, wet-grind operation with water and emulsion, and readily available replacement components help reduce downtime and operating cost. This makes the grinder a strong fit for operations that prioritize uptime, consistency, and long-term value.

Proudly Made in Canada

Built in Canada, the UltraWide Diamond Grinder reflects a focus on practical engineering, durable construction, and shop-ready performance.

Specifications

  • Grinding cylinder: 400 mm wide.

  • Approximate dimensions: 610 x 510 x 260 mm.

  • Weight: 56 kg.

  • Power: 115V, standard North American plug, 20 amp service required.

  • Motor: 1.5 HP, draws approximately 9 amps at startup and under 5 amps during normal operation.

  • Operation: Wet grind with water and emulsion.

UltraWide Diamond Grinder

The UltraWide Diamond Grinder is a 400 mm ski and snowboard base grinding system engineered for precision surface preparation in compact workshop environments. It is designed for rental operations, service shops, and technical tuning applications where consistent base refinement, efficient material removal, and reliable operation are essential.

Precision Base Grinding

The machine uses an electroplated synthetic diamond grinding cylinder to produce a controlled, uniform base finish. This grinding method is effective for removing burrs, nicks, and surface irregularities while maintaining consistent contact across the full width of the base. The result is a clean, repeatable grind that supports improved glide characteristics and more predictable on-snow performance.

Designed for Controlled Performance

With a 400 mm grinding cylinder, the UltraWide Diamond Grinder provides full-width coverage for all ski and snowboard applications. Its compact footprint makes it well suited to smaller service areas, while its 115V power requirement allows operation on standard North American electrical service. The 1.5 HP motor delivers the torque needed for wet grinding applications while keeping power demand practical for shop use.

Efficient Shop Integration

The UltraWide Diamond Grinder is intended as a technical solution for smaller shops that need professional grinding capability without the complexity of a full-size stone machine. Its straightforward design supports faster setup, reduced maintenance requirements, and easier day-to-day operation. For shops managing high turnaround or limited floor space, it offers a practical balance of capability and efficiency.

Maintenance and Serviceability

The system is designed with serviceability in mind. Lower maintenance demands, wet-grind operation with water and emulsion, and readily available replacement components help reduce downtime and operating cost. This makes the grinder a strong fit for operations that prioritize uptime, consistency, and long-term value.

Proudly Made in Canada

Built in Canada, the UltraWide Diamond Grinder reflects a focus on practical engineering, durable construction, and shop-ready performance.

Specifications

  • Grinding cylinder: 400 mm wide.

  • Approximate dimensions: 610 x 510 x 260 mm.

  • Weight: 56 kg.

  • Power: 115V, standard North American plug, 20 amp service required.

  • Motor: 1.5 HP, draws approximately 9 amps at startup and under 5 amps during normal operation.

  • Operation: Wet grind with water and emulsion.

DIAMOND CUT CYLINDER CLEANER
DIAMOND CUT CYLINDER CLEANER
CA$37.25
GRINDER EMULSION
GRINDER EMULSION
CA$18.75

Why Choose the UltraWide Diamond Grinder?

Engineered for Precision

The heart of the UltraWide Diamond Grinder lies in its diamond-cutting technology. Unlike traditional grinders, which rely on stone or other materials, our grinder uses an electroplated synthetic diamond grinding cylinder. This guarantees consistent, precise base tuning, effortlessly removing burrs, nicks, and imperfections, providing a base grind with a finish similar to that of a belt grinder. The result? Your skis glide smoother, turn more sharply, and perform better under all conditions.

Designed for Portability and Convenience

Whether you’re a ski shop owner, rental business, or an avid skier, convenience matters. The UltraWide Diamond Grinder is comparatively- lightweight and compact, making it ideal for small workshops. No complex electrical setups are needed—just a straightforward, easy-to-use system that can be set up and operated in minutes. Plug into any standard 115v outlet.

Cost-Effective and Low Maintenance

Unlike high-maintenance traditional grinders that require frequent and expensive upkeep, the UltraWide Diamond Grinder offers a low-maintenance solution. Whether you’re running a ski rental business or tuning your personal gear, this tool keeps costs down while delivering professional-quality results. Most parts are available at your local hardware store thereby reducing wait time through ordering.

Trusted by Experts

This tool is quickly becoming a favorite among tuning professionals and enthusiasts alike. It is a reliable choice for anyone who values performance, control, and durability on the slopes. With every grind, the UltraWide Diamond Grinder enhances the board’s maneuverability, ensuring better control and confidence with every turn.

Perfect for Micro-Shops and Rental Shops

Whether you’re running a small ski rental business or a tuning shop, the UltraWide Diamond Grinder offers a powerful yet user-friendly solution. It’s versatile enough to meet the needs of anyone looking to improve their tuninge game. Make no mistake, this grinder is not meant to compete against the big stone grinders. It's simply meant to provide an affordable alternative for the smaller shops.

PROUDLY MADE IN CANADA

Get Precision Tuning Today!